FLOOR DRAIN PVC 4"OVER PIPE FIT

2X3 PVC DRAIN 4"S-STEEL STRAINER

2X3 PVC SHORT FLOOR DRAIN SS STR

2X3 PVC DRAIN 4"ANT BRASS STRAIN

Fits over 2" or inside 3" Schedule 40 DWV pipe.
4" diameter plastic strainer available in a variety of colors.
For general purpose drainage requirements where clamping of a waterproofing membrane is not required.
Threaded metal inserts for attaching strainer.

EZ-FLO GENERAL PURPOSE DRAIN: General-purpose drains are used in residential and commercial applications where clamping for the waterproof membrane is not required; designed for finished areas where moderate to heavy traffic is expected
MATERIAL: This floor drain is made with durable and long-lasting PVC
DESIGN: This general-purpose floor drain features a stainless steel grid that gives it a modern, sleek look
EASY TO INSTALL: This drain includes a solvent weld connection for quick and easy installation
SPECS: This drain with stainless steel strainer consists of 3 inch x 4 inch PVC

Also suitable for use as a vent stack or air inlet strainer
Product is manufactured in United States
Product is a air-powered-drain-clearing-tools

Oatey Floor Drain, General Purpose, Straight, PVC, Oatey, 3 X 4 in Connection, Solvent Weld Connection, Suitable For Use With: Over 3 in or Inside 4 in SCH 40 DWV PVC Pipe, 5 in Strainer, Stainless Steel Strainer, 2.685 in Overall Height, 5-1/4 in Overall Width, White, Includes: Screw-Tite Strainer, IAPMO Listed, NES 653, ISO 9001 Certified

3X4 FLOOR DRAIN 5"ANTIQUE BRASS

PVC 4 GEN PURPOSE DRN ABS

FLOOR DRAIN 4

Fits cast iron, plastic, steel, copper and lead pipe
Creates 90 deg connections
Length allows cut-out fittings
Reducing is possible with Qwik bushing - reducer
Leak-proof, rot-proof and resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases
Above ground use only

Flexible elbows size 1 inch -1/2 To remove existing elbow or tee, cut pipe at joints. Slip pipe into fitting socket. Securely tighten stainless steel bands (60 inch/pounds torque). Support pipe on all sides of connection to keep weight off fittings. Test for leaks before concealing. NOT E: Not recommended for underground connections. For drain waste and vent use only. In-wall pipe should be supported. Do not use in pressure applications. Tee and elbows adapt to other pipe sizes with Qwik Bushings.

Fits cast iron, plastic, steel, copper and lead pipe
Creates 90 deg connections
Length allows cut-out fittings
Reducing is possible with Qwik bushing - reducer
Leak-proof, rot-proof and resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases
Above ground use only

Qwik Tee's and Ell's allow up to 90 deg connections of all common household drain, waste and vent pipes quickly and easily without using special tools or fittings. Because they're exceptionally flexible and long, they're the ideal replacement for fittings at the joint during alteration or repair. Fits cast iron, copper, steel or lead pipe. Not recommended for underground connections. Do not use in pressure applications. Adapts to other pipe sizes with qwik bushings. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only. Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Product Information

SNYDER WATER TANK 550VCT

Snyder 550 Gallon Vertical Water Storage Tank is a green stationary water storage tank. This vertical water storage tank is used in a variety of water storage applications such as rainwater collection, well water storage, fire suppression, and bulk water delivery storage.

This plastic vertical water storage tank is constructed with rotationally molded polyethylene resin. It's seamless construction makes it durable and resistant to cracks, chips, and ruptures. The poly tank was made with FDA approved resin that complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2 for the storage of potable water. It's made with UV inhibitors that help protect liquid contents from direct sunlight - making it ideal for both indoor and outdoor use.

The Snyder 550 gallon vertical water storage tank has a specific gravity rating of 1, making it safe for potable water storage. It features a 18" threaded vented manway, 1.5" polypropylene female npt bulkhead fitting inlet, and 2" polypropylene stainless steel bolted fitting outlet.